VIVANT INCENDIO Kit is an e-nail kit that contains the first tank with an embedded heating element in a glass chamber and comes with a powerful battery and water filter.

Features:

  • INCENDIO Firecore Coil Tank- an Embedded Heating Element in a Glass Chamber
  • Complete Accessories Included- Glass Water Filter, Powerful Battery
  • E-nail Mode & VW Mode
  • Powerful 5000mAh Li-ion Battery
  • Glass Water Filter Included

After learning about the brief introduction of Vivant INCENDIO KIT, let’s begin to know how to use it?

vivant incendio kit has a tank with all glass element

1. Screw the incendio tank onto the battery and remove the glass chamber by twisting and pulling upwards.

vivant incendio kit is the best dab vaporizer for concentrate or wax

2. Load the wax or concentrate into the glass heating bowl, then twist and press the glass chamber onto the base. (We recommend loading 0.1g-0.3g concentrate each time to get the best vaping experience.)

vivant incendio kit can adjust the power level with powerful battery capacity3. Press the power button 5 times to turn on the battery and choose the “VW” mode by pressing and hold the function button until “VW” is displayed on the LED screen. (We recommend using between 25W to 40W)

vivant incendio kit can adjust to your desired power with powerful 510 thread battery

4.Using the up and down buttons to adjust the power wattage to your preferred one, then press and hold the power button to vaping!

Add Glass Water Filter

vivant incendio kit can add an included glass water filter

1.Remove the glass chamber and leave the atomizer base on the battery.

vivant incendio kit has a glass water filter included in the package

2.Fill the glass water filter, pour water from the top. Reverse the water filter upside down to pour out excessive water. When it is filled, the water level should not exceed the maximum level indicated in the photo.

To remove the water, gently blow air through the mouthpiece while the filter is disconnected from the atomizer base and the battery.

vivant incendio kit can attach a glass water filter for pure flavor

3.Connect the glass water filter by twisting and pressing it down gently onto the base of the atomizer.

vivant incendio e-nail kit has an e-nail mode to adjust the temperature

4.Press the power button 5 times to turn on the battery, then choose the “e-nail” mode by pressing and holding the function button until “e-nail” is displayed on the LED screen.

vivant incendio kit has full temperature control by the powerful 510 thread battery

5.Using the up and down buttons to select the temperature. (We recommend using between 600℉ to 850℉.)

vivant incendio kit has pre-heat function with the powerful 510 battery

6.To begin the session, press and hold the power button for 2 seconds, after which the display will say “Ready” in about 10 seconds.

vivant incendio e-nail kit is the best dab device with glass coil and heating bowl

7.Dab your concentrate into the heated glass bowl while inhaling through the mouthpiece. Use the carb cap to adjust the air flow.

For more details on how to use Vivant INCENDIO KIT, you can visit the user manual on our website.

 

 


Leave a comment

×